浏览Geeks3D，发现一个好玩儿的shader，改了个gles版本，用cocos2dx在iphone上跑了一下，效果如图：
原文shader是gl版，在手机上跑的很慢，iphone5全屏处理情况下帧数仅为10帧左右，我做了一些优化，使得全屏情况下帧数提升到30左右。 shader我加了些注释，如下： #ifdef GL_ES precision mediump float; #endif varying vec2 v_texCoord; varying vec4 v_fragmentColor; uniform float u_texWidth; uniform float u_texHeight; uniform float touch_x_offset; const float edge_thres = 0.2; const float edge_thres2 = 5.0; #define HueLevCount 6 #define SatLevCount 7 #define ValLevCount 4 //HSV区间 float HueLevels[HueLevCount]; float SatLevels[SatLevCount]; float ValLevels[ValLevCount]; //H（色调）范围（0-360）分为6份 void buildHueLevel() { HueLevels[0]= 0.0; HueLevels[1]= 140.0; HueLevels[2]= 160.0; HueLevels[3]= 240.0; HueLevels[4]= 240.0; HueLevels[5]= 360.0; } //S（饱和度）范围（0-1.0）分为7份 void buildSatLevel() { SatLevels[0]= 0.0; SatLevels[1]= 0.15; SatLevels[2]= 0.3; SatLevels[3]= 0.45; SatLevels[4]= 0.6; SatLevels[5]= 0.8; SatLevels[6]= 1.0; } //V（亮度）范围（0-1.0）分为4份 void buildValLevel() { ValLevels[0]= 0.0; ValLevels[1]= 0.3; ValLevels[2]= 0.6; ValLevels[3]= 1.0; } //将RGB转为HSV vec3 RGBtoHSV(float r,float g,float b) { float minv,maxv,delta; vec3res; minv =min(min(r,g),b); maxv =max(max(r,b); res.z =maxv; // v delta = maxv- minv; if( maxv !=0.0 ) res.y = delta /maxv; // s else { // r = g = b =0 // s = 0,v is undefined res.y = 0.0; res.x = -1.0; return res; } if( r ==maxv ) res.x = ( g - b ) /delta; // between yellow & magenta else if( g== maxv ) res.x = 2.0 + ( b - r ) /delta; // between cyan &yellow else res.x = 4.0 + ( r - g ) /delta; // between magenta &cyan res.x =res.x *60.0; // degrees if( res.x< 0.0 ) res.x = res.x + 360.0; returnres; } //HSV转RGB vec3 HSVtoRGB(float h,float s,float v) { int i; float f,p,q,t; vec3res; if( s == 0.0) { // achromatic (grey) res.x = v; res.y = v; res.z = v; return res; } h /=60.0; // sector 0 to 5 i =int(floor( h )); f = h -float(i); // factorial part of h p = v * (1.0 - s ); q = v * (1.0 - s * f ); t = v * (1.0 - s * ( 1.0 - f ) ); if(i == 0){ res.x = v; res.y = t; res.z = p; } else if(i ==1) { res.x = q; res.y = v; res.z = p; } else if(i ==2) { res.x = p; res.y = v; res.z = t; } else if(i ==3) { res.x = p; res.y = q; res.z = v; } else if(i ==4) { res.x = t; res.y = p; res.z = v; } else { res.x = v; res.y = p; res.z = q; } returnres; } //根据参数值所在区间返回H值 float nearestHueLevel(float col) { if(col <HueLevels[2]) { if(col >= HueLevels[1]) { return HueLevels[2]; } return HueLevels[1]; } else if(col> HueLevels[3]) { if(col <= HueLevels[4]) { return HueLevels[4]; } return HueLevels[5]; } returnHueLevels[3]; } float nearestSatLevel(float col) { if(col <=SatLevels[3]) { if(col > SatLevels[2]) return SatLevels[3]; else if(col > SatLevels[1]) { return SatLevels[2]; } return SatLevels[1]; } else { if(col <= SatLevels[5]) { if(col > SatLevels[4]) return SatLevels[5]; return SatLevels[4]; } return SatLevels[6]; } } float nearestValLevel(float col) { if(col >=ValLevels[1] && col <= ValLevels[2]) { return ValLevels[2]; } else if(col<= ValLevels[1]) { return ValLevels[1]; } returnValLevels[3]; } // averaged pixel intensity from 3 color channels float avg_intensity(vec4 pix) { return(pix.r + pix.g + pix.b)/3.0; } vec4 get_pixel(vec2 coords,float dx,float dy) { returntexture2D(CC_Texture0,coords + vec2(dx,dy)); } //边缘检测（参照链接） float IsEdge(in vec2 coords) { float dxtex= 1.0 /u_texWidth; float dytex= 1.0 /u_texHeight; floatpix[9]; floatdelta; // readneighboring pixel intensities pix[0] =avg_intensity(get_pixel(coords,-dxtex,-dytex)); pix[1] =avg_intensity(get_pixel(coords,0.)); pix[2] =avg_intensity(get_pixel(coords,dytex)); pix[3] =avg_intensity(get_pixel(coords,0.,-dytex)); pix[4] =avg_intensity(get_pixel(coords,0.)); pix[5] =avg_intensity(get_pixel(coords,dytex)); pix[6] =avg_intensity(get_pixel(coords,dxtex,-dytex)); pix[7] =avg_intensity(get_pixel(coords,0.)); pix[8] =avg_intensity(get_pixel(coords,dytex)); // averagecolor differences around neighboring pixels delta =(abs(pix[1]-pix[7])+ abs(pix[5]-pix[3])+ abs(pix[0]-pix[8])+ abs(pix[2]-pix[6]))*0.25; //returnclamp(5.0*delta,0.0,1.0); returnclamp(edge_thres2*delta,1.0); } void main() { buildHueLevel(); buildSatLevel(); buildValLevel(); vec2 uv =v_texCoord.xy; vec4 tc =vec4(1.0,1.0); if (uv.x> (touch_x_offset+0.002)) { vec3 colorOrg = texture2D(CC_Texture0,uv).rgb; //将RGB转化到HSV颜色空间 vec3 vHSV = RGBtoHSV(colorOrg.r,colorOrg.g,colorOrg.b); //将HSV值变换到预先定义的区间值中 vHSV.x = nearestHueLevel(vHSV.x); vHSV.y = nearestSatLevel(vHSV.y); vHSV.z = nearestValLevel(vHSV.z); //边缘检测 float edg = IsEdge(uv); //边框为黑色，否则将HSV转回RGB vec3 vRGB = (edg >= edge_thres)?vec3(0.0,0.0):HSVtoRGB(vHSV.x,vHSV.y,vHSV.z); tc = vec4(vRGB.x,vRGB.y,vRGB.z,1); } else if(uv.x < (touch_x_offset-0.002)) { tc = texture2D(CC_Texture0,uv); } gl_FragColor= tc * v_fragmentColor; } HSV相关概念可以google。 cocos2dx代码如下： TToonifyTest.h #include "cocos2d.h" USING_NS_CC; class TToonifyTest : public Layer { public: staticcocos2d::Scene* createScene(); CREATE_FUNC(TToonifyTest); virtual boolinit() override; virtual boolonTouchBegan(Touch *touch,Event *unused_event) override; virtual voidonTouchMoved(Touch *touch,Event *unused_event) override; voidrefreshRatio(const Vec2& pos); protected: Sprite*m_pSpToonify; }; TToonifyTest.cpp #include "TToonifyTest.h" cocos2d::Scene* TToonifyTest::createScene() { // 'scene'is an autorelease object auto scene =Scene::create(); // 'layer'is an autorelease object auto layer =TToonifyTest::create(); // add layeras a child to scene scene->addChild(layer); // returnthe scene returnscene; } bool TToonifyTest::init() { if(!Layer::init()) return false; m_pSpToonify= Sprite::create("test.jpg"); m_pSpToonify->setAnchorPoint(Vec2(0,0)); m_pSpToonify->setPosition(Vec2(0,30)); this->addChild(m_pSpToonify,1); auto strData=FileUtils::getInstance()->getStringFromFile("Toonify.fsh"); auto program= GLProgram::createWithByteArrays(ccPositionTextureColor_vert,(const GLchar*)strData.c_str()); m_pSpToonify->setGLProgram(program); m_pSpToonify->getGLProgramState()->setUniformFloat("u_texWidth",m_pSpToonify->getTexture()->getContentSize().width); m_pSpToonify->getGLProgramState()->setUniformFloat("u_texHeight",m_pSpToonify->getTexture()->getContentSize().height); m_pSpToonify->getGLProgramState()->setUniformFloat("touch_x_offset",0.5); autolistener = EventListenerTouchOneByO ne::create(); listener->onTouchBegan =CC_CALLBACK_2(TToonifyTest::onTouchBegan,this); listener->onTouchMoved =CC_CALLBACK_2(TToonifyTest::onTouchMoved,this); _eventdispatcher->addEventListenerWithScen eGraPHPriority(listener,this); returntrue; } bool TToonifyTest::onTouchBegan(Touch *touch,Event*unused_event) { refreshRatio(this->convertTouchToNodeSpace(touch)); returntrue; } void TToonifyTest::onTouchMoved(Touch *touch,Event*unused_event) { refreshRatio(this->convertTouchToNodeSpace(touch)); } void TToonifyTest::refreshRatio(const Vec2& pos) { float f =pos.x /m_pSpToonify->getTexture()->getContentSize().width; if(f <0.01) f = 0.01; if(f >0.99) f = 0.99; m_pSpToonify->getGLProgramState()->setUniformFloat("touch_x_offset",f); } cocos2dx版本：3.1.1 测试环境：iphone5 参考链接 原文：http://www.geeks3d.com/20140523/glsl-shader-library-toonify-post-processing-filter/ 边缘检测相关：http://rastergrid.com/blog/2011/01/frei-chen-edge-detector/ PS：懒+忙 导致我几个月都没写博，前阵子还大病一场，恢复中。
原文shader是gl版，在手机上跑的很慢，iphone5全屏处理情况下帧数仅为10帧左右，我做了一些优化，使得全屏情况下帧数提升到30左右。 shader我加了些注释，如下： #ifdef GL_ES precision mediump float; #endif varying vec2 v_texCoord; varying vec4 v_fragmentColor; uniform float u_texWidth; uniform float u_texHeight; uniform float touch_x_offset; const float edge_thres = 0.2; const float edge_thres2 = 5.0; #define HueLevCount 6 #define SatLevCount 7 #define ValLevCount 4 //HSV区间 float HueLevels[HueLevCount]; float SatLevels[SatLevCount]; float ValLevels[ValLevCount]; //H（色调）范围（0-360）分为6份 void buildHueLevel() { HueLevels[0]= 0.0; HueLevels[1]= 140.0; HueLevels[2]= 160.0; HueLevels[3]= 240.0; HueLevels[4]= 240.0; HueLevels[5]= 360.0; } //S（饱和度）范围（0-1.0）分为7份 void buildSatLevel() { SatLevels[0]= 0.0; SatLevels[1]= 0.15; SatLevels[2]= 0.3; SatLevels[3]= 0.45; SatLevels[4]= 0.6; SatLevels[5]= 0.8; SatLevels[6]= 1.0; } //V（亮度）范围（0-1.0）分为4份 void buildValLevel() { ValLevels[0]= 0.0; ValLevels[1]= 0.3; ValLevels[2]= 0.6; ValLevels[3]= 1.0; } //将RGB转为HSV vec3 RGBtoHSV(float r,float g,float b) { float minv,maxv,delta; vec3res; minv =min(min(r,g),b); maxv =max(max(r,b); res.z =maxv; // v delta = maxv- minv; if( maxv !=0.0 ) res.y = delta /maxv; // s else { // r = g = b =0 // s = 0,v is undefined res.y = 0.0; res.x = -1.0; return res; } if( r ==maxv ) res.x = ( g - b ) /delta; // between yellow & magenta else if( g== maxv ) res.x = 2.0 + ( b - r ) /delta; // between cyan &yellow else res.x = 4.0 + ( r - g ) /delta; // between magenta &cyan res.x =res.x *60.0; // degrees if( res.x< 0.0 ) res.x = res.x + 360.0; returnres; } //HSV转RGB vec3 HSVtoRGB(float h,float s,float v) { int i; float f,p,q,t; vec3res; if( s == 0.0) { // achromatic (grey) res.x = v; res.y = v; res.z = v; return res; } h /=60.0; // sector 0 to 5 i =int(floor( h )); f = h -float(i); // factorial part of h p = v * (1.0 - s ); q = v * (1.0 - s * f ); t = v * (1.0 - s * ( 1.0 - f ) ); if(i == 0){ res.x = v; res.y = t; res.z = p; } else if(i ==1) { res.x = q; res.y = v; res.z = p; } else if(i ==2) { res.x = p; res.y = v; res.z = t; } else if(i ==3) { res.x = p; res.y = q; res.z = v; } else if(i ==4) { res.x = t; res.y = p; res.z = v; } else { res.x = v; res.y = p; res.z = q; } returnres; } //根据参数值所在区间返回H值 float nearestHueLevel(float col) { if(col <HueLevels[2]) { if(col >= HueLevels[1]) { return HueLevels[2]; } return HueLevels[1]; } else if(col> HueLevels[3]) { if(col <= HueLevels[4]) { return HueLevels[4]; } return HueLevels[5]; } returnHueLevels[3]; } float nearestSatLevel(float col) { if(col <=SatLevels[3]) { if(col > SatLevels[2]) return SatLevels[3]; else if(col > SatLevels[1]) { return SatLevels[2]; } return SatLevels[1]; } else { if(col <= SatLevels[5]) { if(col > SatLevels[4]) return SatLevels[5]; return SatLevels[4]; } return SatLevels[6]; } } float nearestValLevel(float col) { if(col >=ValLevels[1] && col <= ValLevels[2]) { return ValLevels[2]; } else if(col<= ValLevels[1]) { return ValLevels[1]; } returnValLevels[3]; } // averaged pixel intensity from 3 color channels float avg_intensity(vec4 pix) { return(pix.r + pix.g + pix.b)/3.0; } vec4 get_pixel(vec2 coords,float dx,float dy) { returntexture2D(CC_Texture0,coords + vec2(dx,dy)); } //边缘检测（参照链接） float IsEdge(in vec2 coords) { float dxtex= 1.0 /u_texWidth; float dytex= 1.0 /u_texHeight; floatpix[9]; floatdelta; // readneighboring pixel intensities pix[0] =avg_intensity(get_pixel(coords,-dxtex,-dytex)); pix[1] =avg_intensity(get_pixel(coords,0.)); pix[2] =avg_intensity(get_pixel(coords,dytex)); pix[3] =avg_intensity(get_pixel(coords,0.,-dytex)); pix[4] =avg_intensity(get_pixel(coords,0.)); pix[5] =avg_intensity(get_pixel(coords,dytex)); pix[6] =avg_intensity(get_pixel(coords,dxtex,-dytex)); pix[7] =avg_intensity(get_pixel(coords,0.)); pix[8] =avg_intensity(get_pixel(coords,dytex)); // averagecolor differences around neighboring pixels delta =(abs(pix[1]-pix[7])+ abs(pix[5]-pix[3])+ abs(pix[0]-pix[8])+ abs(pix[2]-pix[6]))*0.25; //returnclamp(5.0*delta,0.0,1.0); returnclamp(edge_thres2*delta,1.0); } void main() { buildHueLevel(); buildSatLevel(); buildValLevel(); vec2 uv =v_texCoord.xy; vec4 tc =vec4(1.0,1.0); if (uv.x> (touch_x_offset+0.002)) { vec3 colorOrg = texture2D(CC_Texture0,uv).rgb; //将RGB转化到HSV颜色空间 vec3 vHSV = RGBtoHSV(colorOrg.r,colorOrg.g,colorOrg.b); //将HSV值变换到预先定义的区间值中 vHSV.x = nearestHueLevel(vHSV.x); vHSV.y = nearestSatLevel(vHSV.y); vHSV.z = nearestValLevel(vHSV.z); //边缘检测 float edg = IsEdge(uv); //边框为黑色，否则将HSV转回RGB vec3 vRGB = (edg >= edge_thres)?vec3(0.0,0.0):HSVtoRGB(vHSV.x,vHSV.y,vHSV.z); tc = vec4(vRGB.x,vRGB.y,vRGB.z,1); } else if(uv.x < (touch_x_offset-0.002)) { tc = texture2D(CC_Texture0,uv); } gl_FragColor= tc * v_fragmentColor; } HSV相关概念可以google。 cocos2dx代码如下： TToonifyTest.h #include "cocos2d.h" USING_NS_CC; class TToonifyTest : public Layer { public: staticcocos2d::Scene* createScene(); CREATE_FUNC(TToonifyTest); virtual boolinit() override; virtual boolonTouchBegan(Touch *touch,Event *unused_event) override; virtual voidonTouchMoved(Touch *touch,Event *unused_event) override; voidrefreshRatio(const Vec2& pos); protected: Sprite*m_pSpToonify; }; TToonifyTest.cpp #include "TToonifyTest.h" cocos2d::Scene* TToonifyTest::createScene() { // 'scene'is an autorelease object auto scene =Scene::create(); // 'layer'is an autorelease object auto layer =TToonifyTest::create(); // add layeras a child to scene scene->addChild(layer); // returnthe scene returnscene; } bool TToonifyTest::init() { if(!Layer::init()) return false; m_pSpToonify= Sprite::create("test.jpg"); m_pSpToonify->setAnchorPoint(Vec2(0,0)); m_pSpToonify->setPosition(Vec2(0,30)); this->addChild(m_pSpToonify,1); auto strData=FileUtils::getInstance()->getStringFromFile("Toonify.fsh"); auto program= GLProgram::createWithByteArrays(ccPositionTextureColor_vert,(const GLchar*)strData.c_str()); m_pSpToonify->setGLProgram(program); m_pSpToonify->getGLProgramState()->setUniformFloat("u_texWidth",m_pSpToonify->getTexture()->getContentSize().width); m_pSpToonify->getGLProgramState()->setUniformFloat("u_texHeight",m_pSpToonify->getTexture()->getContentSize().height); m_pSpToonify->getGLProgramState()->setUniformFloat("touch_x_offset",0.5); autolistener = EventListenerTouchOneByO ne::create(); listener->onTouchBegan =CC_CALLBACK_2(TToonifyTest::onTouchBegan,this); listener->onTouchMoved =CC_CALLBACK_2(TToonifyTest::onTouchMoved,this); _eventdispatcher->addEventListenerWithScen eGraPHPriority(listener,this); returntrue; } bool TToonifyTest::onTouchBegan(Touch *touch,Event*unused_event) { refreshRatio(this->convertTouchToNodeSpace(touch)); returntrue; } void TToonifyTest::onTouchMoved(Touch *touch,Event*unused_event) { refreshRatio(this->convertTouchToNodeSpace(touch)); } void TToonifyTest::refreshRatio(const Vec2& pos) { float f =pos.x /m_pSpToonify->getTexture()->getContentSize().width; if(f <0.01) f = 0.01; if(f >0.99) f = 0.99; m_pSpToonify->getGLProgramState()->setUniformFloat("touch_x_offset",f); } cocos2dx版本：3.1.1 测试环境：iphone5 参考链接 原文：http://www.geeks3d.com/20140523/glsl-shader-library-toonify-post-processing-filter/ 边缘检测相关：http://rastergrid.com/blog/2011/01/frei-chen-edge-detector/ PS：懒+忙 导致我几个月都没写博，前阵子还大病一场，恢复中。
