linux – 无法连接到任何localhost连接

我正在使用带有最新更新的Centos 6.5.

我的问题是,每当我尝试连接到某些本地服务时,它就会挂起,例如：

wget的

wget 127.0.0.1
--2014-03-11 12:43:42--  http://127.0.0.1/
Connecting to 127.0.0.1:80...
After a while timeout...

SSH

# ssh 127.0.0.1 -p 6060 -v
OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 127.0.0.1 [127.0.0.1] port 6060.
debug1: connect to address 127.0.0.1 port 6060: Connection timed out
ssh: connect to host 127.0.0.1 port 6060: Connection timed out

它会挂起来超时.

与telnet相同,与连接到irc服务器相同.外部连接正常运行…

netstat -tpln

# netstat -tpln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name   
tcp        0      0 127.0.0.1:25                0.0.0.0:*                   LISTEN      589/sendmail        
tcp        0      0 127.0.0.1:6060              0.0.0.0:*                   LISTEN      520/sshd            
tcp        0      0 0.0.0.0:80                  0.0.0.0:*                   LISTEN      619/Nginx           
tcp        0      0 0.0.0.0:22                  0.0.0.0:*                   LISTEN      478/sshd            
tcp        0      0 ::1:6060                    :::*                        LISTEN      520/sshd            
tcp        0      0 :::22                       :::*                        LISTEN      478/sshd

netstat -rn

# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 venet0
0.0.0.0         0.0.0.0         0.0.0.0         U         0 0          0 venet0

iptables的

我arleady冲出iptables,没有运气.输出表格iptables：

# iptables -nvL
Chain INPUT (policy ACCEPT 634 packets, 49819 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 517 packets, 47027 bytes)
 pkts bytes target     prot opt in     out     source               destination

环回配置

# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNowN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: venet0: <broADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNowN 
    link/void 
    inet 127.0.0.1/32 scope host venet0
    inet 176.122.224.115/32 brd 176.122.224.115 scope global venet0:0

SELinux的转变并没有改善它.

ip route show table local

# ip route show table local
local 176.122.224.115 dev venet0  proto kernel  scope host  src 176.122.224.115 
broadcast 176.122.224.115 dev venet0  proto kernel  scope link  src 176.122.224.115 
broadcast 127.255.255.255 dev lo  proto kernel  scope link  src 127.0.0.1 
broadcast 127.0.0.0 dev lo  proto kernel  scope link  src 127.0.0.1 
local 127.0.0.1 dev lo  proto kernel  scope host  src 127.0.0.1 
local 127.0.0.0/8 dev lo  proto kernel  scope host  src 127.0.0.1

跟踪路由

# traceroute 127.0.0.1
traceroute to 127.0.0.1 (127.0.0.1), 30 hops max, 60 byte packets
 1  localhost.localdomain (127.0.0.1)  0.029 ms  0.014 ms  0.012 ms

ping 127.0.0.1

工作正常

# ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.024 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.036 ms

关于它的最奇怪的事情是,我可以从外部地址(例如我的ssh’ing的计算机)连接到ssh,Nginx服务器而没有问题.

ISP重启我的服务器后会发生这种情况.可能有用的是,服务器经常更新而不重新启动.

解决方法:

根据您发布的ifconfig 输出,您在两个接口上设置了环回地址127.0.0.1.

尝试

ip addr del 127.0.0.1/32 dev venet0

并查看您的环回访问是否已恢复.

linux – 无法连接到任何localhost连接

相关文章