脚本之家收集整理的这篇文章主要介绍了What is GDB?，脚本之家小编觉得挺不错的，现在分享给大家，也给大家做个参考。一起跟随脚本之家小编过来看看吧！
Redis is developed with a great stress on stability: we do our best with every release to make sure you'll experience a very stable product and no crashes. However even with our best efforts it is impossible to avoid all the critical bugs with 100% of success.
When Redis crashes it produces a detailed report of what happened,however sometimes looking at the crash report is not enough,nor it is possible for the Redis core team to reproduce the issue independently: in this scenario we need help from the user that is able to reproduce the issue.
This little guide shows how to use GDB to provide all the informations the Redis developers will need to track the bug more easily.
GDB is the Gnu Debugger: a program that is able to inspect the internal state of another program. Usually tracking and fixing a bug is an exercise in gathering more informations about the state of the program at the moment the bug happens,so GDB is an extremely useful tool.
GDB can be used in two ways:
From the point of view of investigating Redis bugs we need to use both this GDB modes: the user able to reproduce the bug attaches GDB to his running Redis instance,and when the crash happens,he creates the
core file that the in turn the developer will use to inspect the Redis internals at the time of the crash.
This way the developer can perform all the inspections in his computer without the help of the user,and the user is free to restart Redis in the production environment.
By default Redis is compiled with the
-O2 switch,this means that compiler optimizations are enabled. This makes the Redis executable faster,but at the same time it makes Redis (like any other program) harder to inspect using GDB.
It is better to attach GDB to Redis compiled without optimizations using the
make noopt command to compile it (instead of just using the plain
make command). However if you have an already running Redis in production there is no need to recompile and restart it if this is going to create problems on your side. Even if by a lesser extent GDB still works against executables compiled with optimizations.
It is great if you make sure to recompile Redis with
make noopt after the first crash,so that the next time it will be simpler to track the issue.
You should not be concerned with the loss of performances compiling Redis without optimizations,it is very unlikely that this will cause problems in your environment since it is usually just a matter of a small percentage because Redis is not very CPU-bound (it does a lot of I/O to serve queries).
If you have an already running Redis server,you can attach GDB to it,so that if Redis will crash it will be possible to both inspect the internals and generate a
core dump file.
After you attach GDB to the Redis process it will continue running as usually without any loss of performance,so this is not a dangerous procedure.
In order to attach GDB the first thing you need is the process ID of the running Redis instance (the pid of the process). You can easily obtain it using
$ redis-cli info | grep process_id process_id:58414
In the above example the process ID is 58414.
Attach GDB to the running Redis server typing:
For example: gdb /usr/local/bin/redis-server 58414
GDB will start and will attach to the running server printing something like the following:
Reading symbols for shared libraries + done 0x00007fff8d4797e6 in epoll_wait () (gdb)
At this point GDB is attached but your Redis instance is blocked by GDB. In order to let the Redis instance continue the execution just type continue at the GDB prompt,and press enter.
(gdb) continue Continuing.
Done! Now your Redis instance has GDB attached. You can wait for... the next crash :)
Now it's time to detach your screen / tmux session,if you are running GDB using it,pressing the usual Ctrl-a a key combination.
Redis has a command to simulate a segmentation fault (in other words a bad crash) using the
DEBUG SEGFAULT command (don't use it against a real production instance of course ;). So I'll use this command to crash my instance to show what happens in the GDB side:
(gdb) continue Continuing.
Program received signal EXC_BAD_ACCESS,Could not access memory.
Reason: KERN_INVALID_ADDRESS at address: 0xffffffffffffffff
debugCommand (c=0x7ffc32005000) at debug.c:220
220 ((char)-1) = 'x';
As you can see GDB detected that Redis crashed,and was able to show me even the file name and line number causing the crash. This is already much better than the Redis crash report back trace (containing just function names and binary offsets).
The first thing to do is to obtain a full stack trace with GDB. This is as simple as using the bt command: (that is a short for backtrace):
(gdb) bt #0 debugCommand (c=0x7ffc32005000) at debug.c:220 #1 0x000000010d246d63 in call (c=0x7ffc32005000) at redis.c:1163 #2 0x000000010d247290 in processCommand (c=0x7ffc32005000) at redis.c:1305 #3 0x000000010d251660 in processInputBuffer (c=0x7ffc32005000) at networking.c:959 #4 0x000000010d251872 in readQueryFromClient (el=0x0,fd=5,privdata=0x7fff76f1c0b0,mask=220924512) at networking.c:1021 #5 0x000000010d243523 in aeProcessEvents (eventLoop=0x7fff6ce408d0,flags=220829559) at ae.c:352 #6 0x000000010d24373b in aeMain (eventLoop=0x10d429ef0) at ae.c:397 #7 0x000000010d2494ff in main (argc=1,argv=0x10d2b2900) at redis.c:2046
This shows the backtrace,but we also want to dump the processor registers using the info registers command:
(gdb) info registers rax 0x0 0 rbx 0x7ffc32005000 140721147367424 rcx 0x10d2b0a60 4515891808 rdx 0x7fff76f1c0b0 140735188943024 rsi 0x10d299777 4515796855 rdi 0x0 0 rbp 0x7fff6ce40730 0x7fff6ce40730 rsp 0x7fff6ce40650 0x7fff6ce40650 r8 0x4f26b3f7 1327936503 r9 0x7fff6ce40718 140735020271384 r10 0x81 129 r11 0x10d430398 4517462936 r12 0x4b7c04f8babc0 1327936503000000 r13 0x10d3350a0 4516434080 r14 0x10d42d9f0 4517452272 r15 0x10d430398 4517462936 rip 0x10d26cfd4 0x10d26cfd4
eflags 0x10246 66118 cs 0x2b 43 ss 0x0 0 ds 0x0 0 es 0x0 0 fs 0x0 0 gs 0x0 0
Please make sure to include both this outputs in your bug report.
The next step is to generate the core dump,that is the image of the memory of the running Redis process. This is performed using the
(gdb) gcore Saved corefile core.58414
Now you have the core dump to send to the Redis developer,but it is important to understand that this happens to contain all the data that was inside the Redis instance at the time of the crash: Redis developers will make sure to don't share the content with any other,and will delete the file as soon as it is no longer used for debugging purposes,but you are warned that sending the core file you are sending your data.
If there are sensible stuff in the data set we suggest sending the dump directly to Salvatore Sanfilippo (that is the guy writing this doc) at the email address antirez at gmail dot com.
Finally you can send everything to the Redis core team:
Your help is extremely important! Many issues can only be tracked this way,thanks! It is also possible that helping Redis debugging you'll be among the winners of the next .
微信公众号搜索 “ 程序精选 ” ，选择关注！
微信公众号搜索 “ 程序精选 ”