reactos操作系统实现(111)

IdeSendSmartCommand函数主要发送IDE的命令。具体实现代码如下：

#001 ULONG

#002 NTAPI

#003 IdeSendSmartCommand(

#004 IN PVOID HwDeviceExtension,

#005 IN PSCSI_REQUEST_BLOCK Srb

#006 )

#007

#008 /*++

#009

#010 Routine Description:

#011

#012 This routine handles SMART enable,disable,read attributes and threshold commands.

#013

#014 Arguments:

#015

#016 HwDeviceExtension - HBA miniport driver's adapter data storage

#017 Srb - IO request packet

#018

#019 Return Value:

#020

#021 SRB status

#022

#023 --*/

#024

#025 {

取得驱动对象和控制器的基地址。

#026 PHW_DEVICE_EXTENSION deviceExtension = HwDeviceExtension;

#027 PIDE_REGISTERS_1 baseIoAddress1 = deviceExtension->BaseIoAddress1[Srb->TargetId >> 1];

#028 PIDE_REGISTERS_2 baseIoAddress2 = deviceExtension->BaseIoAddress2[Srb->TargetId >> 1];

从SRB获取输入参数和输出参数。

#029 PSENDCMDOUTParaMS cmdOutParameters = (PSENDCMDOUTParaMS)(((PUCHAR)Srb->DataBuffer) + sizeof(SRB_IO_CONTROL));

#030 SENDCMDINParaMS cmdInParameters = *(PSENDCMDINParaMS)(((PUCHAR)Srb->DataBuffer) + sizeof(SRB_IO_CONTROL));

#031 PIDEREGS regs = &cmdInParameters.irDriveRegs;

#032 ULONG i;

#033 UCHAR statusByte,targetId;

#034

#035

检查是否合法的操作。

#036 if (cmdInParameters.irDriveRegs.bCommandReg == SMART_CMD) {

#037

#038 targetId = cmdInParameters.bDriveNumber;

#039

#040 //Todo optimize this check

#041

#042 if ((!(deviceExtension->DeviceFlags[targetId] & DFLAGS_DEVICE_PRESENT)) ||

#043 (deviceExtension->DeviceFlags[targetId] & DFLAGS_ATAPI_DEVICE)) {

#044

#045 return SRB_STATUS_SELECTION_TIMEOUT;

#046 }

#047

获取输出的命令。

#048 deviceExtension->SmartCommand = cmdInParameters.irDriveRegs.bFeaturesReg;

#049

#050 //

#051 // Determine which of the commands to carry out.

#052 //

#053

检查命令是否读取的操作。

#054 if ((cmdInParameters.irDriveRegs.bFeaturesReg == READ_ATTRIBUTES) ||

#055 (cmdInParameters.irDriveRegs.bFeaturesReg == READ_THRESHOLDS)) {

#056

等待IDE设备空闲。

#057 WaitOnBusy(baseIoAddress2,statusByte);

#058

#059 if (statusByte & IDE_STATUS_BUSY) {

#060 DebugPrint((1,

#061 "IdeSendSmartCommand: Returning BUSY status/n"));

#062 return SRB_STATUS_BUSY;

#063 }

#064

#065 //

#066 // Zero the ouput buffer as the input buffer info. has been saved off locally (the buffers are the same).

#067 //

#068

清空输出缓冲区。

#069 for (i = 0; i < (sizeof(SENDCMDOUTParaMS) + READ_ATTRIBUTE_BUFFER_SIZE - 1); i++) {

#070 ((PUCHAR)cmdOutParameters)[i] = 0;

#071 }

#072

#073 //

#074 // Set data buffer pointer and words left.

#075 //

#076

设置输出缓冲区作为接收IDE设备的数据保存区。

#077 deviceExtension->DataBuffer = (PUSHORT)cmdOutParameters->bBuffer;

#078 deviceExtension->WordsLeft = READ_ATTRIBUTE_BUFFER_SIZE / 2;

#079

#080 //

#081 // Indicate expecting an interrupt.

#082 //

#083

这里设置希望使用中断的方式返回。

#084 deviceExtension->ExpectingInterrupt = TRUE;

#085

把SRB的命令发送给IDE设备。

#086 ScsiPortWritePortUchar(&baseIoAddress1->DriveSelect,(UCHAR)(((targetId & 0x1) << 4) | 0xA0));

#087 ScsiPortWritePortUchar((PUCHAR)baseIoAddress1 + 1,regs->bFeaturesReg);

#088 ScsiPortWritePortUchar(&baseIoAddress1->BlockCount,regs->bSectorCountReg);

#089 ScsiPortWritePortUchar(&baseIoAddress1->BlockNumber,regs->bSectorNumberReg);

#090 ScsiPortWritePortUchar(&baseIoAddress1->CylinderLow,regs->bCylLowReg);

#091 ScsiPortWritePortUchar(&baseIoAddress1->CylinderHigh,regs->bCylHighReg);

#092 ScsiPortWritePortUchar(&baseIoAddress1->Command,regs->bCommandReg);

#093

#094 //

#095 // Wait for interrupt.

#096 //

#097

进入等待中断读取数据返回。

#098 return SRB_STATUS_PENDING;

#099

#100 } else if ((cmdInParameters.irDriveRegs.bFeaturesReg == ENABLE_SMART) ||

#101 (cmdInParameters.irDriveRegs.bFeaturesReg == disABLE_SMART) ||

#102 (cmdInParameters.irDriveRegs.bFeaturesReg == RETURN_SMART_STATUS) ||

#103 (cmdInParameters.irDriveRegs.bFeaturesReg == ENABLE_disABLE_AUTOSAVE) ||

#104 (cmdInParameters.irDriveRegs.bFeaturesReg == EXECUTE_OFFLINE_DIAGS) ||

#105 (cmdInParameters.irDriveRegs.bFeaturesReg == SAVE_ATTRIBUTE_VALUES)) {

#106

这是设置一些属性，没有数据返回。

#107 WaitOnBusy(baseIoAddress2,statusByte);

#108

#109 if (statusByte & IDE_STATUS_BUSY) {

#110 DebugPrint((1,

#111 "IdeSendSmartCommand: Returning BUSY status/n"));

#112 return SRB_STATUS_BUSY;

#113 }

#114

#115 //

#116 // Zero the ouput buffer as the input buffer info. has been saved off locally (the buffers are the same).

#117 //

#118

#119 for (i = 0; i < (sizeof(SENDCMDOUTParaMS) - 1); i++) {

#120 ((PUCHAR)cmdOutParameters)[i] = 0;

#121 }

#122

#123 //

#124 // Set data buffer pointer and indicate no data transfer.

#125 //

#126

#127 deviceExtension->DataBuffer = (PUSHORT)cmdOutParameters->bBuffer;

#128 deviceExtension->WordsLeft = 0;

#129

#130 //

#131 // Indicate expecting an interrupt.

#132 //

#133

#134 deviceExtension->ExpectingInterrupt = TRUE;

#135

#136 ScsiPortWritePortUchar(&baseIoAddress1->DriveSelect,(UCHAR)(((targetId & 0x1) << 4) | 0xA0));

#137 ScsiPortWritePortUchar((PUCHAR)baseIoAddress1 + 1,regs->bFeaturesReg);

#138 ScsiPortWritePortUchar(&baseIoAddress1->BlockCount,regs->bSectorCountReg);

#139 ScsiPortWritePortUchar(&baseIoAddress1->BlockNumber,regs->bSectorNumberReg);

#140 ScsiPortWritePortUchar(&baseIoAddress1->CylinderLow,regs->bCylLowReg);

#141 ScsiPortWritePortUchar(&baseIoAddress1->CylinderHigh,regs->bCylHighReg);

#142 ScsiPortWritePortUchar(&baseIoAddress1->Command,regs->bCommandReg);

#143

#144 //

#145 // Wait for interrupt.

#146 //

#147

#148 return SRB_STATUS_PENDING;

#149 }

#150 }

#151

如果到这里运行，就是非法命令，不能处理。

#152 return SRB_STATUS_INVALID_REQUEST;

#153

#154} // end IdeSendSmartCommand()