linux – ext4文件系统损坏 – 可能是硬件错误？

我打开电脑约半小时后,我在dmesg中收到这些错误：

[ 1355.677957] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318420: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251700offset=0(0),inode=1802725748,rec_len=179136,name_len=32
 [ 1355.677973] Aborting journal on device sda2-8.
 [ 1355.678101] EXT4-fs (sda2): Remounting filesystem read-only
 [ 1355.690144] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318416: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251699offset=0(0),inode=2194783952,rec_len=53280,name_len=152
 [ 1356.864720] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1312795: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251176offset=1460(13748),inode=1432317541,rec_len=208208,name_len=119

/ dev / sda是​​一个SSD,它使用noop调度程序.

/ etc / fstab条目：

UUID=acb4eefa-48ff-4ee1-bb5f-2dccce7d011f / ext4 errors=remount-ro,noatime,discard,user_xattr 0 1

系统信息：

$cat /proc/mounts | grep /dev/sd
/dev/sda1 /boot ext2 rw,errors=continue 0 0
$cat /etc/lsb-release 
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.3 LTS"
$uname -a
Linux leetpad 2.6.35-30-generic-pae #61~lucid1-Ubuntu SMP Thu Oct 13 21:14:29 UTC 2011 i686 GNU/Linux

智能输出-a：

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     STT_FTM28GX25H
Serial Number:    P637510-MIBY-706A009
Firmware Version: 1916
User Capacity:    128,035,676,160 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Nov 24 20:53:48 2011 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (   0) seconds.
Offline data collection
capabilities:            (0x1d) SMART execute Offline immediate.
                    No Auto Offline data collection support.
                    Abort Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x00) Error logging NOT supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   0) minutes.
Extended self-test routine
recommended polling time:    (   0) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   005   000   000    Old_age   Offline  In_the_past 0
  9 Power_On_Hours          0x0000   141   002   000    Old_age   Offline      -       0
 12 Power_Cycle_Count       0x0000   115   002   000    Old_age   Offline      -       0
184 Unknown_Attribute       0x0000   084   000   000    Old_age   Offline  In_the_past 0
195 Hardware_ECC_Recovered  0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
196 Reallocated_Event_Count 0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
197 Current_Pending_Sector  0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
198 Offline_Uncorrectable   0x0000   002   107   000    Old_age   Offline      -       21198
199 UDMA_CRC_Error_Count    0x0000   063   003   000    Old_age   Offline      -       26957
200 Multi_Zone_Error_Rate   0x0000   099   124   000    Old_age   Offline      -       446
201 Soft_Read_Error_Rate    0x0000   024   154   000    Old_age   Offline      -       328
202 TA_Increase_Count       0x0000   115   254   000    Old_age   Offline      -       115
203 Run_Out_Cancel          0x0000   247   245   000    Old_age   Offline      -       83
204 Shock_Count_Write_Opern 0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
205 Shock_Rate_Write_Opern  0x0000   016   039   000    Old_age   Offline      -       0
206 Flying_Height           0x0000   005   000   000    Old_age   Offline  In_the_past 0
207 Spin_High_Current       0x0000   055   015   000    Old_age   Offline      -       0
208 Spin_Buzz               0x0000   248   001   000    Old_age   Offline      -       0
209 Offline_Seek_Performnce 0x0000   095   000   000    Old_age   Offline  In_the_past 0
211 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
212 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
213 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0

Warning: device does not support Error Logging
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
No Errors Logged

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests,use: smartctl -t]


Device does not support Selective Self Tests/Logging

我运行memtest 7个小时,它没有发现任何内存错误.

任何明显的想法在这种情况下会出现什么问题？我能想象到的最合理的事情是SSD正在静默地丢弃一些写请求,最终导致EXT4文件系统不一致(但没有磁盘I / O错误).怎么会发生这种情况？是否有相关的配置选项我应该确保正确设置？

我应该使用哪些工具来诊断硬件故障？是否可以在不覆盖数据的情况下诊断SSD故障？

解决方法

首先,您可能希望对根磁盘执行完整的fsck.有时,我发现快速检查有时会遗漏一些重要的错误.您可以通过触摸根目录中的文件(可能取决于Linux发行版)来执行此操作,但可以尝试

touch /forcefsck

并重新启动或启动救援CD并在那里执行root的fsck.完整,我的意思是使用-f fsck参数.

第二,您的系统日志是否指示任何硬件错误？

正如Kario先生所说,您可能会考虑使用smartctl检查磁盘运行状况.我发现我使用的某些磁盘不会报告信息.