有没有办法通过软件识别你的记忆速度？我在Fedora 9上,希望找到我目前在那里的DIMM的速度.
我试过’lshw’,但它没有显示速度.我知道主板支持3种不同的速度,但我不知道那里有什么,不想关掉盒子.
有任何想法吗？
谢谢,
编辑：根据dmidecode,我发现ram为’30 ns’.如果主板仅支持400,533,667 Mhz RAM,它怎么能是33 MHz？
编辑2：还有其他工具吗？
编辑3：我实际上投降并最终停电几分钟并打开案件.事实证明它是667 MhZ – 这个型号：http://www.directron.com/rm12864aa667.html.尽管通过软件无法确定它是667,但我已经将HD的答案标记为正确的答案,因为这似乎是这项工作的最佳工具.
这是demidecode – type memory的输出
# dmidecode 2.7 SMBIOS 2.4 present. Handle 0x0008,DMI type 5,20 bytes. Memory Controller information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 2048 MB Supported Speeds: 70 ns 60 ns 50 ns Supported Memory Types: DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 2 0x0009 0x000A Enabled Error Correcting Capabilities: None Handle 0x0009,DMI type 6,12 bytes. Memory Module information Socket Designation: DIMM0 Bank Connections: 9 11 Current Speed: 30 ns Type: UnkNown FPM Parity SDRAM Installed Size: 1024 MB (Single-bank Connection) Enabled Size: 1024 MB (Single-bank Connection) Error Status: OK Handle 0x000A,12 bytes. Memory Module information Socket Designation: DIMM1 Bank Connections: 9 11 Current Speed: 30 ns Type: UnkNown FPM Parity SDRAM Installed Size: 1024 MB (Single-bank Connection) Enabled Size: 1024 MB (Single-bank Connection) Error Status: OK Handle 0x002F,DMI type 16,15 bytes. Physical Memory Array Location: System Board Or motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error information Handle: Not Provided Number Of Devices: 2 Handle 0x0031,DMI type 17,27 bytes. Memory Device Array Handle: 0x002F Error information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: SDRAM Type Detail: Synchronous Speed: UnkNown Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: PartNum0 Handle 0x0033,27 bytes. Memory Device Array Handle: 0x002F Error information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: SDRAM Type Detail: Synchronous Speed: UnkNown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: PartNum1
解决方法
dmidecode是您正在寻找的工具.