让Cisco 3650响应arp告诉0.0.0.0

问题描述

我在响应arp探测的Cisco第3层交换机遇到问题。我的linux服务器在下面发送arp探测。

1143    5.041315    b6:8d:32:cd:d9:04   Broadcast   ARP 42  Who has 192.168.100.1? (ARP Probe)

这是捕获所见到的接线图。

Frame 1143: 42 bytes on wire (336 bits),42 bytes captured (336 bits)
Ethernet II,Src: b6:8d:32:cd:d9:04 (b6:8d:32:cd:d9:04),Dst: Broadcast (ff:ff:ff:ff:ff:ff)
    Destination: Broadcast (ff:ff:ff:ff:ff:ff)
        Address: Broadcast (ff:ff:ff:ff:ff:ff)
        .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
        .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
    Source: b6:8d:32:cd:d9:04 (b6:8d:32:cd:d9:04)
        Address: b6:8d:32:cd:d9:04 (b6:8d:32:cd:d9:04)
        .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
        .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
    Type: ARP (0x0806)
Address Resolution Protocol (ARP Probe)
    Hardware type: Ethernet (1)
    Protocol type: IPv4 (0x0800)
    Hardware size: 6
    Protocol size: 4
    Opcode: request (1)
    [Is probe: True]
    Sender MAC address: b6:8d:32:cd:d9:04 (b6:8d:32:cd:d9:04)
    Sender IP address: 0.0.0.0
    Target MAC address: 00:00:00_00:00:00 (00:00:00:00:00:00)
    Target IP address: 192.168.100.1

我已经在我们的Cisco设备和其他多个选项上尝试过ip device tracking，但是无法让我们的Cisco响应arp探测。

谢谢

解决方法

暂无找到可以解决该程序问题的有效方法，小编努力寻找整理中！

如果你已经找到好的解决方法，欢迎将解决方案带上本链接一起发送给小编。

小编邮箱:dio#foxmail.com (将#修改为@）