问题描述
我试图访问EdgeGateway的cpu，Ram和存储详细信息，因此想使用python和psutil来完成工作
在尝试将psutil安装在Azure Edge python模块中时，在构建时出现以下错误。在这里如何使用psuitl，我想测量边缘网关的cpu和Ram详细信息。
tep 4/6 : RUN pip install -r requirements.txt
---> Running in d65864318578
Collecting azure-iot-device~=2.0.0
Downloading azure_iot_device-2.0.1-py2.py3-none-any.whl (271 kB)
Collecting psutil
Downloading psutil-5.7.3.tar.gz (465 kB)
Collecting six<2.0.0,>=1.12.0
Downloading six-1.15.0-py2.py3-none-any.whl (10 kB)
Collecting requests<3.0.0,>=2.20.0
Downloading requests-2.24.0-py2.py3-none-any.whl (61 kB)
Collecting requests-unixsocket<1.0.0,>=0.1.5
Downloading requests_unixsocket-0.2.0-py2.py3-none-any.whl (11 kB)
Collecting janus<1.0.0,>=0.4.0; python_version >= "3.5"
Downloading janus-0.6.1-py3-none-any.whl (11 kB)
Collecting transitions<1.0.0,>=0.6.8
Downloading transitions-0.8.4-py2.py3-none-any.whl (77 kB)
Collecting urllib3!=1.25.0,!=1.25.1,<1.26,>1.21.1; python_version != "3.4"
Downloading urllib3-1.25.11-py2.py3-none-any.whl (127 kB)
Collecting paho-mqtt<2.0.0,>=1.4.0
Downloading paho-mqtt-1.5.1.tar.gz (101 kB)
Collecting certifi>=2017.4.17
Downloading certifi-2020.6.20-py2.py3-none-any.whl (156 kB)
Collecting chardet<4,>=3.0.2
Downloading chardet-3.0.4-py2.py3-none-any.whl (133 kB)
Collecting idna<3,>=2.5
Downloading idna-2.10-py2.py3-none-any.whl (58 kB)
Building wheels for collected packages: psutil,paho-mqtt
Building wheel for psutil (setup.py): started
Building wheel for psutil (setup.py): finished with status 'error'
ERROR: Command errored out with exit status 1:
command: /usr/local/bin/python -u -c 'import sys,setuptools,tokenize; sys.argv[0] = '"'"'/tmp/pip-install-rde7gv_j/psutil/setup.py'"'"'; __file__='"'"'/tmp/pip-install-rde7gv_j/psutil/setup.py'"'"';f=getattr(tokenize,'"'"'open'"'"',open)(__file__);code=f.read().replace('"'"'\r\n'"'"','"'"'\n'"'"');f.close();exec(compile(code,__file__,'"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-x3f7r1fq
cwd: /tmp/pip-install-rde7gv_j/psutil/
Complete output (44 lines):
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.7
creating build/lib.linux-x86_64-3.7/psutil
copying psutil/_pssunos.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psaix.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psosx.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_common.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_compat.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_pslinux.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psposix.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psbsd.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/__init__.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_pswindows.py -> build/lib.linux-x86_64-3.7/psutil
creating build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/__main__.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/runner.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_aix.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_osx.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_process.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_sunos.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_linux.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_misc.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_contracts.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_windows.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_bsd.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_memleaks.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_system.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_connections.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_unicode.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/__init__.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_testutils.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_posix.py -> build/lib.linux-x86_64-3.7/psutil/tests
running build_ext
building 'psutil._psutil_linux' extension
creating build/temp.linux-x86_64-3.7
creating build/temp.linux-x86_64-3.7/psutil
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -DPSUTIL_POSIX=1 -DPSUTIL_SIZEOF_PID_T=4 -DPSUTIL_VERSION=573 -DPSUTIL_LINUX=1 -DPSUTIL_ETHTOOL_MISSING_TYPES=1 -I/usr/local/include/python3.7m -c psutil/_psutil_common.c -o build/temp.linux-x86_64-3.7/psutil/_psutil_common.o
unable to execute 'gcc': No such file or directory
C compiler or Python headers are not installed on this system. Try to run:
sudo apt-get install gcc python3-dev
error: command 'gcc' Failed with exit status 1
----------------------------------------
ERROR: Failed building wheel for psutil
Running setup.py clean for psutil
Building wheel for paho-mqtt (setup.py): started
Building wheel for paho-mqtt (setup.py): finished with status 'done'
Created wheel for paho-mqtt: filename=paho_mqtt-1.5.1-py3-none-any.whl size=61543 sha256=f27a76a9f3b030cdc789284e823441f35b5deb9b4f021f0bad8d8cbc0c324b53
Stored in directory: /root/.cache/pip/wheels/c9/be/2a/883db47312c70ef7ffcaff281f3294e3075f62da075474d4bb
Successfully built paho-mqtt
Failed to build psutil
Installing collected packages: six,certifi,chardet,urllib3,idna,requests,requests-unixsocket,janus,transitions,paho-mqtt,azure-iot-device,psutil
Running setup.py install for psutil: started
ERROR: Command errored out with exit status 1:
command: /usr/local/bin/python -u -c 'import sys,'"'"'exec'"'"'))' install --record /tmp/pip-record-ygf_yh8g/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.7m/psutil
cwd: /tmp/pip-install-rde7gv_j/psutil/
Complete output (44 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.7
creating build/lib.linux-x86_64-3.7/psutil
copying psutil/_pssunos.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psaix.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psosx.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_common.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_compat.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_pslinux.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psposix.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_psbsd.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/__init__.py -> build/lib.linux-x86_64-3.7/psutil
copying psutil/_pswindows.py -> build/lib.linux-x86_64-3.7/psutil
creating build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/__main__.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/runner.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_aix.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_osx.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_process.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_sunos.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_linux.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_misc.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_contracts.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_windows.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_bsd.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_memleaks.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_system.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_connections.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_unicode.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/__init__.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_testutils.py -> build/lib.linux-x86_64-3.7/psutil/tests
copying psutil/tests/test_posix.py -> build/lib.linux-x86_64-3.7/psutil/tests
running build_ext
building 'psutil._psutil_linux' extension
creating build/temp.linux-x86_64-3.7
creating build/temp.linux-x86_64-3.7/psutil
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -DPSUTIL_POSIX=1 -DPSUTIL_SIZEOF_PID_T=4 -DPSUTIL_VERSION=573 -DPSUTIL_LINUX=1 -DPSUTIL_ETHTOOL_MISSING_TYPES=1 -I/usr/local/include/python3.7m -c psutil/_psutil_common.c -o build/temp.linux-x86_64-3.7/psutil/_psutil_common.o
unable to execute 'gcc': No such file or directory
C compiler or Python headers are not installed on this system. Try to run:
sudo apt-get install gcc python3-dev
error: command 'gcc' Failed with exit status 1
----------------------------------------
Running setup.py install for psutil: finished with status 'error'
ERROR: Command errored out with exit status 1: /usr/local/bin/python -u -c 'import sys,'"'"'exec'"'"'))' install --record /tmp/pip-record-ygf_yh8g/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.7m/psutil Check the logs for full command output.
The command '/bin/sh -c pip install -r requirements.txt' returned a non-zero code: 1解决方法
暂无找到可以解决该程序问题的有效方法，小编努力寻找整理中！
如果你已经找到好的解决方法，欢迎将解决方案带上本链接一起发送给小编。
小编邮箱:dio#foxmail.com (将#修改为@）