问题描述
我在Digi板上移植NFC OM5578 / PN7150S模块时遇到问题。
我正在使用Digi ConnectCore 8X SBC Pro板，该板连接在板和LVDS1端口之间以进行I2C控制。
我遵循了NXP提供的移植手册（AN11690.pdf）来制作pn5xx_i2c.ko。
但是，未作为insert mod（insmod）命令安装pn5xx_i2c.ko文件，并且Hal Layer修补程序无法正常工作。
root@ubuntu:/lib/modules/4.14.153/kernel/drivers/nfc# insmod pn5xx_i2c.ko
insmod: ERROR: Could not insert module pn5xx_i2c.ko: Invalid module format
root@ubuntu:/lib/modules/4.14.153/kernel/drivers/nfc#
root@ubuntu:/usr/local/dea-9.0-r2/vendor/nxp/nfc# ./install_NFC.sh
+++ Installing NXP-NCI NFC support for PN7150 +++
- patching required files
patching file 1.1/Nfc.h
patching file extns/intf/nxpnfc/1.0/manifest.xml
patching file halimpl/hal/phNxpNciHal.cc
Reversed (or prevIoUsly applied) patch detected! Assume -R? [n] y
Hunk #2 succeeded at 964 (offset 2 lines).
Hunk #3 succeeded at 1370 (offset 2 lines).
Hunk #4 succeeded at 1638 (offset 2 lines).
patching file halimpl/hal/phNxpNciHal_ext.cc
Reversed (or prevIoUsly applied) patch detected! Assume -R? [n] y
Hunk #3 succeeded at 355 (offset 9 lines).
Hunk #4 succeeded at 863 (offset 9 lines).
patching file halimpl/utils/NxpNfcCapability.cpp
Reversed (or prevIoUsly applied) patch detected! Assume -R? [n] y
(Stripping trailing CRs from patch; use --binary to disable.)
patching file nci/jni/NativeNfcManager.cpp
Reversed (or prevIoUsly applied) patch detected! Assume -R? [n] y
Hunk #2 succeeded at 165 (offset 1 line).
Hunk #3 succeeded at 206 (offset 1 line).
Hunk #4 succeeded at 745 (offset 1 line).
Hunk #5 succeeded at 753 (offset 1 line).
Hunk #6 succeeded at 806 (offset 1 line).
(Stripping trailing CRs from patch; use --binary to disable.)
patching file nci/jni/extns/pn54x/inc/phNxpExtns.h
Hunk #1 succeeded at 107 with fuzz 2 (offset 58 lines).
(Stripping trailing CRs from patch; use --binary to disable.)
patching file nci/jni/extns/pn54x/src/phNxpExtns.cpp
Hunk #1 succeeded at 104 with fuzz 1.
(Stripping trailing CRs from patch; use --binary to disable.)
patching file nci/jni/extns/pn54x/src/phNxpExtns_DebugAgc.cpp
(Stripping trailing CRs from patch; use --binary to disable.)
patching file nci/jni/extns/pn54x/src/utils/phNxpconfig.h
Hunk #1 Failed at 40.
1 out of 1 hunk Failed -- saving rejects to file
nci/jni/extns/pn54x/src/utils/phNxpconfig.h.rej
+++ NXP-NCI NFC support installation completed +++
root@ubuntu:/usr/local/dea-9.0-r2/vendor/nxp/nfc#
请检查Digi ConnectCore 8x SBC Pro板上是否提供PN7150移植。 如果它不起作用，请告诉我是否还有其他需要处理的地方。
谢谢
※NXP OM5578 / PN7150S
※AN11690.pdf
https://www.nxp.com/docs/en/application-note/AN11690.pdf
解决方法
暂无找到可以解决该程序问题的有效方法，小编努力寻找整理中！
如果你已经找到好的解决方法，欢迎将解决方案带上本链接一起发送给小编。
小编邮箱:dio#foxmail.com (将#修改为@）