问题描述
这是我第一次学习如何使用 Doxygen 编写文档，我通过在 Github 中练习 ADXL345 的 Doxy 代码作为基础 here。我能够通过更改评论来生成 Doxygen html 站点，但是虽然我的 Adafruit_ADXL345_U.h 头文件显示正确，但 Adafruit_ADXL345_U.cpp 缺少站点中显示的文档。它只显示了一个静态函数“spixfer()”。
我使用的 doxywizard 版本是 1.9.1，存在 *.cpp 扩展名，我使用的配置是：
ALWAYS_DETAILED_SEC = YES
INLINE_INHERITED_MEMB = YES
FULL_PATH_NAMES = YES
JAVADOC_AUTOBRIEF = NO
INHERIT_DOCS = YES
BUILTIN_STL_SUPPORT = YES
CPP_CLI_SUPPORT = YES
EXTRACT_ALL = YES
EXTRACT_PRIVATE = YES
EXTRACT_PRIV_VIRTUAL = YES
EXTRACT_PACKAGE = YES
EXTRACT_STATIC = YES
EXTRACT_LOCAL_CLASSES = YES
EXTRACT_LOCAL_METHODS = YES
EXTRACT_ANON_NSPACES = YES
INTERNAL_DOCS = YES
CASE_SENSE_NAMES = YES
SHOW_GROUPED_MEMB_INC = YES
FORCE_LOCAL_INCLUDES = YES
RECURSIVE = YES
SOURCE_broWSER = YES
INLINE_SOURCE = YES
ENABLE_PREPROCESSING = YES
MACRO_EXPANSION = YES
EXPAND_ONLY_PREDEF = NO
SEARCH_INCLUDES = YES
SKIP_FUNCTION_MACROS = YES
下面使用的代码：
Adafruit_ADXL345_U.h
/**************************************************************************/
/*!
@file Adafruit_ADXL345_U.h
@author K. Townsend (Adafruit Industries)
The ADXL345 is a digital accelerometer with 13-bit resolution,capable
of measuring up to +/-16g. This driver communicate using I2C.
This is a library for the Adafruit ADXL345 breakout
----> https://www.adafruit.com/products/1231
Adafruit invests time and resources providing this open source code,please support Adafruit and open-source hardware by purchasing
products from Adafruit!
@section license License
BSD (see license.txt)
@section HISTORY
v1.1 - Added Adafruit_Sensor library support
v1.0 - First release
*/
/**************************************************************************/
#ifndef Adafruit_ADXL345_h
#define Adafruit_ADXL345_h
#if ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#include <Adafruit_Sensor.h>
#include <Wire.h>
/*=========================================================================
I2C ADDRESS/BITS
-----------------------------------------------------------------------*/
#define ADXL345_DEFAULT_ADDRESS (0x53) ///< Assumes ALT address pin low
/*=========================================================================*/
/*=========================================================================
REGISTERS
-----------------------------------------------------------------------*/
#define ADXL345_REG_DEVID (0x00) ///< Device ID
#define ADXL345_REG_THRESH_TAP (0x1D) ///< Tap threshold
#define ADXL345_REG_OFSX (0x1E) ///< X-axis offset
#define ADXL345_REG_OFSY (0x1F) ///< Y-axis offset
#define ADXL345_REG_OFSZ (0x20) ///< Z-axis offset
#define ADXL345_REG_DUR (0x21) ///< Tap duration
#define ADXL345_REG_LATENT (0x22) ///< Tap latency
#define ADXL345_REG_WINDOW (0x23) ///< Tap window
#define ADXL345_REG_THRESH_ACT (0x24) ///< Activity threshold
#define ADXL345_REG_THRESH_INACT (0x25) ///< Inactivity threshold
#define ADXL345_REG_TIME_INACT (0x26) ///< Inactivity time
#define ADXL345_REG_ACT_INACT_CTL \
(0x27) ///< Axis enable control for activity and inactivity detection
#define ADXL345_REG_THRESH_FF (0x28) ///< Free-fall threshold
#define ADXL345_REG_TIME_FF (0x29) ///< Free-fall time
#define ADXL345_REG_TAP_AXES (0x2A) ///< Axis control for single/double tap
#define ADXL345_REG_ACT_TAP_STATUS (0x2B) ///< Source for single/double tap
#define ADXL345_REG_BW_RATE (0x2C) ///< Data rate and power mode control
#define ADXL345_REG_POWER_CTL (0x2D) ///< Power-saving features control
#define ADXL345_REG_INT_ENABLE (0x2E) ///< Interrupt enable control
#define ADXL345_REG_INT_MAP (0x2F) ///< Interrupt mapping control
#define ADXL345_REG_INT_SOURCE (0x30) ///< Source of interrupts
#define ADXL345_REG_DATA_FORMAT (0x31) ///< Data format control
#define ADXL345_REG_datax0 (0x32) ///< X-axis data 0
#define ADXL345_REG_datax1 (0x33) ///< X-axis data 1
#define ADXL345_REG_DATAY0 (0x34) ///< Y-axis data 0
#define ADXL345_REG_DATAY1 (0x35) ///< Y-axis data 1
#define ADXL345_REG_DATAZ0 (0x36) ///< Z-axis data 0
#define ADXL345_REG_DATAZ1 (0x37) ///< Z-axis data 1
#define ADXL345_REG_FIFO_CTL (0x38) ///< FIFO control
#define ADXL345_REG_FIFO_STATUS (0x39) ///< FIFO status
/*=========================================================================*/
/*=========================================================================
REGISTERS
-----------------------------------------------------------------------*/
#define ADXL345_MG2G_MULTIPLIER (0.004) ///< 4mg per lsb
/*=========================================================================*/
/**
* @brief Used with register 0x2C (ADXL345_REG_BW_RATE) to set bandwidth
*/
typedef enum {
ADXL345_DATaraTE_3200_HZ = 0b1111,///< 1600Hz Bandwidth 140�A IDD
ADXL345_DATaraTE_1600_HZ = 0b1110,///< 800Hz Bandwidth 90�A IDD
ADXL345_DATaraTE_800_HZ = 0b1101,///< 400Hz Bandwidth 140�A IDD
ADXL345_DATaraTE_400_HZ = 0b1100,///< 200Hz Bandwidth 140�A IDD
ADXL345_DATaraTE_200_HZ = 0b1011,///< 100Hz Bandwidth 140�A IDD
ADXL345_DATaraTE_100_HZ = 0b1010,///< 50Hz Bandwidth 140�A IDD
ADXL345_DATaraTE_50_HZ = 0b1001,///< 25Hz Bandwidth 90�A IDD
ADXL345_DATaraTE_25_HZ = 0b1000,///< 12.5Hz Bandwidth 60�A IDD
ADXL345_DATaraTE_12_5_HZ = 0b0111,///< 6.25Hz Bandwidth 50�A IDD
ADXL345_DATaraTE_6_25HZ = 0b0110,///< 3.13Hz Bandwidth 45�A IDD
ADXL345_DATaraTE_3_13_HZ = 0b0101,///< 1.56Hz Bandwidth 40�A IDD
ADXL345_DATaraTE_1_56_HZ = 0b0100,///< 0.78Hz Bandwidth 34�A IDD
ADXL345_DATaraTE_0_78_HZ = 0b0011,///< 0.39Hz Bandwidth 23�A IDD
ADXL345_DATaraTE_0_39_HZ = 0b0010,///< 0.20Hz Bandwidth 23�A IDD
ADXL345_DATaraTE_0_20_HZ = 0b0001,///< 0.10Hz Bandwidth 23�A IDD
ADXL345_DATaraTE_0_10_HZ =
0b0000 ///< 0.05Hz Bandwidth 23�A IDD (default value)
} datarate_t;
/**
* @brief Used with register 0x31 (ADXL345_REG_DATA_FORMAT) to set g range
*
*/
typedef enum {
ADXL345_RANGE_16_G = 0b11,///< +/- 16g
ADXL345_RANGE_8_G = 0b10,///< +/- 8g
ADXL345_RANGE_4_G = 0b01,///< +/- 4g
ADXL345_RANGE_2_G = 0b00 ///< +/- 2g (default value)
} range_t;
/**
* @brief Class to interact with the ADXL345 accelerometer
*
*/
class Adafruit_ADXL345_Unified : public Adafruit_Sensor {
public:
Adafruit_ADXL345_Unified(int32_t sensorID = -1);
Adafruit_ADXL345_Unified(uint8_t clock,uint8_t miso,uint8_t mosi,uint8_t cs,int32_t sensorID = -1);
bool begin(uint8_t addr = ADXL345_DEFAULT_ADDRESS);
void setRange(range_t range);
range_t getRange(void);
void setDatarate(datarate_t datarate);
datarate_t getDatarate(void);
bool getEvent(sensors_event_t *);
void getSensor(sensor_t *);
uint8_t getdeviceid(void);
void writeRegister(uint8_t reg,uint8_t value);
uint8_t readRegister(uint8_t reg);
int16_t read16(uint8_t reg);
int16_t getX(void),getY(void),getZ(void);
private:
inline uint8_t i2cread(void);
inline void i2cwrite(uint8_t x);
int32_t _sensorID;
range_t _range;
uint8_t _clk,_do,_di,_cs;
bool _i2c;
int8_t _i2caddr;
};
#endif // Adafruit_ADXL345_h
Adafruit_ADXL345_U.cpp
/**************************************************************************/
/*!
@file Adafruit_ADXL345_U.cpp
@author K.Townsend (Adafruit Industries)
*/
/**************************************************************************/
#if ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#include <Wire.h>
#include <limits.h>
#include "Adafruit_ADXL345_U.h"
/**************************************************************************/
/*!
@brief And abstract 'send' method for different versions of the Arduino
Wire library
@returns The byte read
*/
/**************************************************************************/
inline uint8_t Adafruit_ADXL345_Unified::i2cread(void) {
#if ARDUINO >= 100
return Wire.read();
#else
return Wire.receive();
#endif
}
/**************************************************************************/
/*!
@brief And abstract 'send' method for different versions of the Arduino
Wire library
@param x The byte to send
*/
/**************************************************************************/
inline void Adafruit_ADXL345_Unified::i2cwrite(uint8_t x) {
#if ARDUINO >= 100
Wire.write((uint8_t)x);
#else
Wire.send(x);
#endif
}
/**************************************************************************/
/**
* @brief Abstract away SPI receiver & transmitter
* @param clock The pin number for SCK,the SPI ClocK line
* @param miso The pin number for MISO,the SPI Master In Slave Out line
* @param mosi The pin number for MOSI,the SPI Master Out Slave In line
* @param data The byte to send
*
* @return uint8_t The single byte response
*/
static uint8_t spixfer(uint8_t clock,uint8_t data) {
uint8_t reply = 0;
for (int i = 7; i >= 0; i--) {
reply <<= 1;
digitalWrite(clock,LOW);
digitalWrite(mosi,data & (1 << i));
digitalWrite(clock,HIGH);
if (digitalRead(miso))
reply |= 1;
}
return reply;
}
/**************************************************************************/
/*!
@brief Writes one byte to the specified destination register
@param reg The address of the register to write to
@param value The value to set the register to
*/
/**************************************************************************/
void Adafruit_ADXL345_Unified::writeRegister(uint8_t reg,uint8_t value) {
if (_i2c) {
Wire.beginTransmission((uint8_t)_i2caddr);
i2cwrite((uint8_t)reg);
i2cwrite((uint8_t)(value));
Wire.endTransmission();
} else {
digitalWrite(_cs,LOW);
spixfer(_clk,reg);
spixfer(_clk,value);
digitalWrite(_cs,HIGH);
}
}
/**************************************************************************/
/*!
@brief Reads one byte from the specified register
@param reg The address of the register to read from
@returns The single byte value of the requested register
*/
/**************************************************************************/
uint8_t Adafruit_ADXL345_Unified::readRegister(uint8_t reg) {
if (_i2c) {
Wire.beginTransmission((uint8_t)_i2caddr);
i2cwrite(reg);
Wire.endTransmission();
Wire.requestFrom((uint8_t)_i2caddr,1);
return (i2cread());
} else {
reg |= 0x80; // read byte
digitalWrite(_cs,reg);
uint8_t reply = spixfer(_clk,0xFF);
digitalWrite(_cs,HIGH);
return reply;
}
}
/**************************************************************************/
/*!
@brief Reads two bytes from the specified register
@param reg The address of the register to read from
@return The two bytes read from the sensor starting at the given address
*/
/**************************************************************************/
int16_t Adafruit_ADXL345_Unified::read16(uint8_t reg) {
if (_i2c) {
Wire.beginTransmission((uint8_t)_i2caddr);
i2cwrite(reg);
Wire.endTransmission();
Wire.requestFrom((uint8_t)_i2caddr,2);
return (uint16_t)(i2cread() | (i2cread() << 8));
} else {
reg |= 0x80 | 0x40; // read byte | multibyte
digitalWrite(_cs,reg);
uint16_t reply =
spixfer(_clk,0xFF) | (spixfer(_clk,0xFF) << 8);
digitalWrite(_cs,HIGH);
return reply;
}
}
/**************************************************************************/
/*!
@brief Reads the device ID (can be used to check connection)
@return The Device ID of the connected sensor
*/
/**************************************************************************/
uint8_t Adafruit_ADXL345_Unified::getdeviceid(void) {
// Check device ID register
return readRegister(ADXL345_REG_DEVID);
}
/**************************************************************************/
/*!
@brief Gets the most recent X axis value
@return The raw `int16_t` unscaled x-axis acceleration value
*/
/**************************************************************************/
int16_t Adafruit_ADXL345_Unified::getX(void) {
return read16(ADXL345_REG_datax0);
}
/**************************************************************************/
/*!
@brief Gets the most recent Y axis value
@return The raw `int16_t` unscaled y-axis acceleration value
*/
/**************************************************************************/
int16_t Adafruit_ADXL345_Unified::getY(void) {
return read16(ADXL345_REG_DATAY0);
}
/**************************************************************************/
/*!
@brief Gets the most recent Z axis value
@return The raw `int16_t` unscaled z-axis acceleration value
*/
/**************************************************************************/
int16_t Adafruit_ADXL345_Unified::getZ(void) {
return read16(ADXL345_REG_DATAZ0);
}
/**************************************************************************/
/*!
@brief Instantiates a new ADXL345 class
@param sensorID A unique ID to use to differentiate the sensor from others
*/
/**************************************************************************/
Adafruit_ADXL345_Unified::Adafruit_ADXL345_Unified(int32_t sensorID) {
_sensorID = sensorID;
_range = ADXL345_RANGE_2_G;
_i2c = true;
}
/**************************************************************************/
/*!
@brief Instantiates a new ADXL345 class in SPI mode
@param clock The pin number for SCK,the SPI ClocK line
@param miso The pin number for MISO,the SPI Master In Slave Out line
@param mosi The pin number for MOSI,the SPI Master Out Slave In line
@param cs The pin number for CS,the SPI Chip Select line
@param sensorID A unique ID to use to differentiate the sensor from others
*/
/**************************************************************************/
Adafruit_ADXL345_Unified::Adafruit_ADXL345_Unified(uint8_t clock,int32_t sensorID) {
_sensorID = sensorID;
_range = ADXL345_RANGE_2_G;
_cs = cs;
_clk = clock;
_do = mosi;
_di = miso;
_i2c = false;
}
/**************************************************************************/
/*!
@brief Setups the HW (reads coefficients values,etc.)
@param i2caddr The I2C address to begin communication with
@return true: success false: a sensor with the correct ID was not found
*/
/**************************************************************************/
bool Adafruit_ADXL345_Unified::begin(uint8_t i2caddr) {
_i2caddr = i2caddr;
if (_i2c)
Wire.begin();
else {
pinMode(_cs,OUTPUT);
digitalWrite(_cs,HIGH);
pinMode(_clk,OUTPUT);
digitalWrite(_clk,HIGH);
pinMode(_do,OUTPUT);
pinMode(_di,INPUT);
}
/* Check connection */
uint8_t deviceid = getdeviceid();
if (deviceid != 0xE5) {
/* No ADXL345 detected ... return false */
return false;
}
// Enable measurements
writeRegister(ADXL345_REG_POWER_CTL,0x08);
return true;
}
/**************************************************************************/
/*!
@brief Sets the g range for the accelerometer
@param range The new `range_t` to set the accelerometer to
*/
/**************************************************************************/
void Adafruit_ADXL345_Unified::setRange(range_t range) {
/* Read the data format register to preserve bits */
uint8_t format = readRegister(ADXL345_REG_DATA_FORMAT);
/* Update the data rate */
format &= ~0x0F;
format |= range;
/* Make sure that the FULL-RES bit is enabled for range scaling */
format |= 0x08;
/* Write the register back to the IC */
writeRegister(ADXL345_REG_DATA_FORMAT,format);
/* Keep track of the current range (to avoid readbacks) */
_range = range;
}
/**************************************************************************/
/*!
@brief Gets the g range for the accelerometer
@return The current `range_t` value
*/
/**************************************************************************/
range_t Adafruit_ADXL345_Unified::getRange(void) {
/* Read the data format register to preserve bits */
return (range_t)(readRegister(ADXL345_REG_DATA_FORMAT) & 0x03);
}
/**************************************************************************/
/*!
@brief Sets the data rate for the ADXL345 (controls power consumption)
@param datarate The `datarate_t` to set
*/
/**************************************************************************/
void Adafruit_ADXL345_Unified::setDatarate(datarate_t datarate) {
/* Note: The LOW_POWER bits are currently ignored and we always keep
the device in 'normal' mode */
writeRegister(ADXL345_REG_BW_RATE,datarate);
}
/**************************************************************************/
/*!
@brief Gets the data rate for the ADXL345 (controls power consumption)
@return The current data rate
*/
/**************************************************************************/
datarate_t Adafruit_ADXL345_Unified::getDatarate(void) {
return (datarate_t)(readRegister(ADXL345_REG_BW_RATE) & 0x0F);
}
/**************************************************************************/
/*!
@brief Gets the most recent sensor event
@param event Pointer to the event object to fill
@return true: success
*/
/**************************************************************************/
bool Adafruit_ADXL345_Unified::getEvent(sensors_event_t *event) {
/* Clear the event */
memset(event,sizeof(sensors_event_t));
event->version = sizeof(sensors_event_t);
event->sensor_id = _sensorID;
event->type = SENSOR_TYPE_ACCELEROMETER;
event->timestamp = 0;
event->acceleration.x =
getX() * ADXL345_MG2G_MULTIPLIER * SENSORS_GraviTY_STANDARD;
event->acceleration.y =
getY() * ADXL345_MG2G_MULTIPLIER * SENSORS_GraviTY_STANDARD;
event->acceleration.z =
getZ() * ADXL345_MG2G_MULTIPLIER * SENSORS_GraviTY_STANDARD;
return true;
}
/**************************************************************************/
/*!
*/
/**************************************************************************/
/**
* @brief Fill a `sensor_t` struct with information about the sensor
*
* @param sensor Pointer to a `sensor_t` struct to fill
*/
void Adafruit_ADXL345_Unified::getSensor(sensor_t *sensor) {
/* Clear the sensor_t object */
memset(sensor,sizeof(sensor_t));
/* Insert the sensor name in the fixed length char array */
strncpy(sensor->name,"ADXL345",sizeof(sensor->name) - 1);
sensor->name[sizeof(sensor->name) - 1] = 0;
sensor->version = 1;
sensor->sensor_id = _sensorID;
sensor->type = SENSOR_TYPE_ACCELEROMETER;
sensor->min_delay = 0;
sensor->max_value = -156.9064F; /* -16g = 156.9064 m/s^2 */
sensor->min_value = 156.9064F; /* 16g = 156.9064 m/s^2 */
sensor->resolution = 0.03923F; /* 4mg = 0.0392266 m/s^2 */
}
请问我可以在配置中更改什么才能查看其余部分 文档注释？
解决方法
暂无找到可以解决该程序问题的有效方法，小编努力寻找整理中！
如果你已经找到好的解决方法，欢迎将解决方案带上本链接一起发送给小编。
小编邮箱:dio#foxmail.com (将#修改为@）