错误的按钮输出 Ps4 转 Esp32

问题描述

所以，我正在尝试构建一个带有一些伺服系统和 Esp32 开发板的四足机器人。所有硬件必须由 PS4 控制器控制。但是 Esp32 到 Ps4 的连接有问题。例如，当我按下 L2 按钮时，程序会显示“按下了 R2 按钮”。

这是我上传的测试代码。

 #include <PS4Controller.h>
    void setup() {
  Serial.begin(115200);
  PS4.begin("03:03:03:03:03:03");
  Serial.println("Ready.");
}

void loop() {
  // Below has all accessible outputs from the controller
  if (PS4.isConnected()) {
    if (PS4.Right()) Serial.println("Right Button");
    if (PS4.Down()) Serial.println("Down Button");
    if (PS4.Up()) Serial.println("Up Button");
    if (PS4.Left()) Serial.println("Left Button");

    if (PS4.Square()) Serial.println("Square Button");
    if (PS4.Cross()) Serial.println("Cross Button");
    if (PS4.Circle()) Serial.println("Circle Button");
    if (PS4.Triangle()) Serial.println("Triangle Button");

    if (PS4.UpRight()) Serial.println("Up Right");
    if (PS4.DownRight()) Serial.println("Down Right");
    if (PS4.UpLeft()) Serial.println("Up Left");
    if (PS4.DownLeft()) Serial.println("Down Left");

    if (PS4.L1()) Serial.println("L1 Button");
    if (PS4.R1()) Serial.println("R1 Button");

    if (PS4.Share()) Serial.println("Share Button");
    if (PS4.Options()) Serial.println("Options Button");
    if (PS4.L3()) Serial.println("L3 Button");
    if (PS4.R3()) Serial.println("R3 Button");

    if (PS4.PSButton()) Serial.println("PS Button");
    if (PS4.Touchpad()) Serial.println("Touch Pad Button");

    if (PS4.L2()) {
      Serial.printf("L2 button at %d\n",PS4.L2Value());
    }
    if (PS4.R2()) {
      Serial.printf("R2 button at %d\n",PS4.R2Value());
    }

    if (PS4.LStickX()) {
      Serial.printf("Left Stick x at %d\n",PS4.LStickX());
    }
    if (PS4.LStickY()) {
      Serial.printf("Left Stick y at %d\n",PS4.LStickY());
    }
    if (PS4.RStickX()) {
      Serial.printf("Right Stick x at %d\n",PS4.RStickX());
    }
    if (PS4.RStickY()) {
      Serial.printf("Right Stick y at %d\n",PS4.RStickY());
    }

    if (PS4.Charging()) Serial.println("The controller is charging");
    if (PS4.Audio()) Serial.println("The controller has headphones attached");
    if (PS4.Mic()) Serial.println("The controller has a mic attached");

    Serial.printf("Battery Level : %d\n",PS4.Battery());

    Serial.println();
    // This delay is to make the output more human readable
    // Remove it when you're not trying to see the output
    delay(1000);

outputs

解决方法

暂无找到可以解决该程序问题的有效方法，小编努力寻找整理中！

如果你已经找到好的解决方法，欢迎将解决方案带上本链接一起发送给小编。

小编邮箱:dio#foxmail.com (将#修改为@）