ixgbe eth0:由于 tx 超时而启动重置和 ixgbe eth0:重置适配器

问题描述

服务器接口有时会抖动。它是随机发生的。我们在 dmesg 中获得以下日志,并且在 syslog 中也捕获了类似的日志。

操作系统:

OS-Debian GNU/Linux 9 (stretch)
4.9.0-12-amd64 #1 SMP Debian 4.9.210-1 (2020-01-20) x86_64 GNU/Linux

详情:

driver: ixgbe
version: 4.4.0-k
firmware-version: 0x80001112
expansion-rom-version: 
bus-info: 0000:41:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

日志:

ixgbe 0000:41:00.0 eth0: initiating reset due to tx timeout
ixgbe 0000:41:00.0 eth0: Reset adapter
ixgbe 0000:41:00.1 eth1: initiating reset due to tx timeout
ixgbe 0000:41:00.1 eth1: Reset adapter
ixgbe 0000:41:00.0 eth0: speed changed to 0 for port eth0
ixgbe 0000:41:00.1 eth1: speed changed to 0 for port eth1
bond0: link status definitely down for interface eth0,disabling it
bond0: Now running without any active interface!
bond0: link status definitely down for interface eth1,disabling it
ixgbe 0000:41:00.0 eth0: NIC Link is Up 10 Gbps,Flow Control: RX/TX
bond0: link status definitely up for interface eth0,10000 Mbps full duplex
bond0: first active interface up!
ixgbe 0000:41:00.1 eth1: NIC Link is Up 10 Gbps,Flow Control: RX/TX
bond0: link status definitely up for interface eth1,10000 Mbps full duplex
ixgbe 0000:41:00.1 eth1: initiating reset due to tx timeout
ixgbe 0000:41:00.1 eth1: Reset adapter
ixgbe 0000:41:00.1 eth1: speed changed to 0 for port eth1
bond0: link status definitely down for interface eth1,disabling it
ixgbe 0000:41:00.1 eth1: NIC Link is Up 10 Gbps,10000 Mbps full duplex
ixgbe 0000:41:00.1 eth1: initiating reset due to tx timeout
ixgbe 0000:41:00.1 eth1: Reset adapter
sched: RT throttling activated

我该如何解决这个问题?

解决方法

暂无找到可以解决该程序问题的有效方法,小编努力寻找整理中!

如果你已经找到好的解决方法,欢迎将解决方案带上本链接一起发送给小编。

小编邮箱:dio#foxmail.com (将#修改为@)