1. sd_fusing文件夹基本介绍
sd_fusing文件中的sd_fushing.sh脚本文件用于制作U-Boot的SD卡镜像,即将u-boot.bin镜像烧录进SD卡中,以便于开发板从SD卡中启动U-Boot。
sd_fusing.sh | SD卡镜像制作脚本 |
sd_fusing2.sh | SD卡镜像制作脚本2,一般用第一个 |
sd_fdisk.c | 用于生成sd_fdisk |
sd_fdisk | 用于SD卡分区 |
C110-EVT1-mkbl1.c | 用于生成mkbl1 |
mkbl1 | 用于计算U-Boot校验和 |
c110.signedBL1_bin | 将U-Boot的BL1分离出来(前8K) |
Makefile | 编译文件 |
P.S.:sd_fisk.c生成了sd_fdisk可执行文件。sd_fusing.sh中调用sd_fdisk对mmc设备进行分区,具体的分区信息已经包含在sd_fdisk文件中。分区完成后,会将分区信息(MBR)存储在mmc的第0扇区。内核在初始化mmc时,直接读取MBR即可得知mmc的分区信息。
使用方法如下:
1)进入/uboot/sd_fusing目录下;
2)运行命令:make clean (清除之前编译的文件);
3)运行命令:make (编译生成烧录工具);
4)运行命令:./sd_fusing.sh /dev/sdb(将u_boot.bin镜像烧录进SD卡)。
2. sd_fusing.sh脚本文件分析
sd_fusing.sh脚本的主要作用是在SD卡内创建一个fat32分区,然后将U-Boot的BL1和整个U-Boot烧录进SD卡中。
//定义SD卡设备,应该根据实际的设备信息进行修改 reader_type1="/dev/sdb" reader_type2="/dev/mmcblk0"
//如果没有参数,则显示帮助信息
if [ -z $1 ] then echo "usage: ./sd_fusing.sh <SD Reader‘s device file>" exit 0 fi //判断SD卡的设备类型,然后定义四个分区
if [ $1 = $reader_type1 ] then partition1="$11" partition2="$12" partition3="$13" partition4="$14" elif [ $1 = $reader_type2 ] then partition1="$1p1" partition2="$1p2" partition3="$1p3" partition4="$1p4"
else //不能识别SD卡设备
echo "Unsupported SD reader" exit 0 fi //判断设备是否存在,且是否是块设备
if [ -b $1 ] then echo "$1 reader is identified."
else echo "$1 is NOT identified." exit 0 fi //开始进行SD卡分区
# make partition echo "make sd card partition" echo "./sd_fdisk $1" ./sd_fdisk $1 dd iflag=dsync oflag=dsync if=sd_mbr.dat of=$1 rm sd_mbr.dat # format umount $partition1 2> /dev/null umount $partition2 2> /dev/null umount $partition3 2> /dev/null umount $partition4 2> /dev/null echo "mkfs.vfat -F 32 $partition1" //建立一个fat32分区
mkfs.vfat -F 32 $partition1 //定义U-Boot的扇区位置
#<BL1 fusing> bl1_position=1 uboot_position=49
//将U-Boot的BL1(前8K)和U-Boot的校验和(uboot的前16字节)烧录进SD卡的bl1_position=1扇区
echo "BL1 fusing" ./mkbl1 ../uboot_inand.bin SD-bl1-8k.bin 8192 //计算uboot的校验和
dd iflag=dsync oflag=dsync if=SD-bl1-8k.bin of=$1 seek=$bl1_position //烧录
rm SD-bl1-8k.bin //将整个U-Boot烧录进SD卡的uboot_position=49扇区
#<u-boot fusing> echo "u-boot fusing" dd iflag=dsync oflag=dsync if=../uboot_inand.bin of=$1 seek=$uboot_position //烧录成功信息提示
#<Message display> echo "U-boot image is fused successfully." echo "Eject SD card and insert it again."